BORIS for Autodesk Inventor - Secure Your CAD Designs

Claude for Manufacturing Ties AI to Fusion, Infor, NetSuite and Microsoft 365: What Inventor Teams Must Check Before Sharing Data | Autodesk Inventor | Register and Certify Ownership of CAD design

2026-11-16 15:19 News
On 12 November 2026, Anthropic introduced Claude for Manufacturing, a plugin for its Claude AI assistant that drafts quotes, quality reports, supplier requests and production reports from the software a factory already uses. It comes with 17 skills and four connectors: Autodesk Fusion, Infor, Microsoft 365 and Oracle NetSuite. It is available on Claude's Team and Enterprise plans.
For a small or mid-sized manufacturer that designs in Autodesk Inventor, this is not a CAD announcement. Inventor and Vault are not on the connector list, and the only CAD system named is Fusion. But the plugin is built to read exactly the material that sits around your Inventor models: customer requests for quotes, drawings attached to emails, inspection reports, supplier bids, job costs and the shared folders where all of this lives.
Below: what was announced, what the plugin can and cannot do, where your design data could end up in the workflow and what to check before your team switches it on. Some details are not public yet, such as the full list of skills and the price, and we say so where it matters.
TL;DR: Claude for Manufacturing is a set of 17 ready-made task instructions (skills) and four connectors that let Claude read records in Autodesk Fusion, Infor, Microsoft 365 and Oracle NetSuite. Infor's own plugin can also make changes in Infor after a person approves. Anthropic says every skill ends with a human review and that the plugin does not operate equipment.

For Inventor teams, the main question is access, not features. Through the Microsoft 365 connector, Claude can work with what is in your shared folders and inboxes, which often includes customer drawings under NDA. Decide which folders and roles it may use, check customer contracts, keep feedback buttons off if you do not want conversations stored, export less from Vault and keep dated proof of your own designs.

What did Anthropic announce on 12 November?

According to Anthropic's announcement, the plugin helps manufacturers draft quotes, quality reports and supplier requests from records they already have. Skills are instructions for a specific task. Anthropic names 17 of them across sales, quality, operations, supply chain, design and setup, but describes only six in detail. A user can run one skill or chain several, for example from a customer request to a draft quote.
Setup is done in a conversation. After installing the plugin, a team tells Claude "Set us up". Claude asks which systems the team uses, tests the connectors and reports which skills cannot fully run yet. Systems without a connector can still be used: Anthropic suggests saving regular exports to Microsoft 365, where Claude can read them. Anthropic cites a 2025 Manufacturing Leadership Council survey in which 79% of manufacturers said they still enter data by hand.
Anthropic says the skills are a starting point that companies can build on and that more manufacturing skills are planned. It named no customers and published no price. A technical webinar is scheduled for 17 November at 11:00 ET.
Skill or connectorWhat Claude works withWhat Inventor teams should ask
Quoting a new jobThe customer request, missing information, costs of similar past jobs; drafts a quoteDoes the request include customer drawings or models under NDA, and may they be processed by an AI service?
Investigating a failed inspectionThe failure, past inspection reports; ranks likely causes, drafts a corrective action reportDo the reports name customers, part numbers or tolerances that are confidential?
Diagnosing a breakdownSensor exports, repair notes, photos and manuals; ranks causes for a technicianAre machine manuals and photos licensed or confidential?
Sourcing from another supplierPrepares a request for quotes and compares the bidsWhich drawings go out with the request, and to whom?
Comparing designs with Autodesk FusionGenerates variations of an existing Fusion model, scores them against the engineer's targets, drafts a decision memoWho owns the variations, and where are they saved?
Reporting on productionOutput against target, downtime and its costWho may see cost and output figures?
Microsoft 365 connectorProcedures, supplier emails and exported reports in shared folders and inboxesWhich folders and mailboxes can each user reach today?
Infor plugin (by Infor)Read and write actions in Infor, such as releasing purchase orders, within the user's permissionsWhich roles may approve changes, and is every action logged?

What can the plugin actually change?

Most of the plugin drafts documents for a person to check. Anthropic says the skills are "built to end with a user's review" and that Claude can link figures and claims back to the underlying data and documents. Lauren Collett, who leads enterprise go-to-market at Anthropic, told Manufacturing Dive that the aim is "making sure a person is signing off on every draft."
The exception is Infor. With Anthropic's Infor connector alone, Claude looks up purchase orders and stock. With Infor's own plugin, called Infor Industry AI for Claude, it can also act: Infor lists creating customer orders, releasing purchase orders, issuing materials to production, shipping orders and recording inventory or labour, depending on the user's permissions. Infor says it is available to select Infor Velocity Suite customers, that an Owner must enable the connector on Team and Enterprise plans and that the agent returns to the user for approval when an action could affect another order or customer.
Neither plugin runs machines. Anthropic states that Claude for Manufacturing does not operate equipment and mentions a separate research preview, the Model Hardware Standard, for describing equipment measurements, settings and safety limits.

Where do Inventor and Vault fit in?

Anthropic does not mention Inventor, Vault or any CAD system other than Fusion. The Fusion connector, made by Autodesk, has been in Claude's connector directory since May 2026. According to its listing, Fusion must be installed and running on the same computer, its MCP server must be switched on in Fusion's preferences and the connection is local only.
Inventor has its own route. As we reported in our article on Inventor 2027.2, the update released on 3 November includes a local MCP server that lets MCP-capable agents such as Claude Code inspect and modify a model in an open Inventor session. Anthropic has not said whether its manufacturing skills work with it. For now, the realistic way Inventor data reaches the plugin is through files: PDFs of drawings, STEP exports, bills of materials and reports that someone saves to a shared folder or attaches to an email.
That matters because those files are often the most sensitive version of your design. A STEP export or a fully dimensioned drawing carries more than a quote needs. Our guide to Inventor Simplify shows how to share a model without giving away internal detail, and our article on connecting Inventor and Vault BOMs to ERP systems explains which BOM data usually flows to Infor, NetSuite and similar systems already.

What happens to the data you share?

The announcement makes no separate privacy statement for the plugin. Anthropic's general rule for its business products is that, by default, it does not use inputs or outputs from Claude for Work or its API to train its models. There is one exception worth knowing: when a user presses the thumbs up or down button, Anthropic stores the full conversation for up to five years and may use it for training, after removing user and customer IDs. Owners of Team and Enterprise plans can switch that button off with the Rate chats setting.
Training is only part of the question. Through the Microsoft 365 connector, Claude works with what the signed-in user can reach in shared folders and inboxes. If a sales engineer can open every customer folder on SharePoint, so can the assistant acting for them. Many firms find that their folder permissions are wider than they thought. Our guides on role-based access control for CAD data and tracking who accesses your CAD files are a good place to start that review.
Then there are your customers. Many NDAs and supply contracts limit who may process drawings and for what purpose. Some now mention AI services directly. Before a quoting skill reads a customer's request for quote with attached models, check whether the contract allows it. Our article on AI quoting agents and Inventor drawings looks at the same question for a dedicated quoting tool, and our NDA guide for working with freelancers explains what good clauses look like.
AI drafts the quote. You still need to prove the design is yours.

BORIS for Autodesk Inventor registers your CAD files with a blockchain timestamp and gives you a certificate of ownership, straight from Inventor.

👉 See how BORIS for Autodesk Inventor works

What should Inventor teams do before switching it on?

  1. Write down which systems you would connect. List the folders, mailboxes and ERP areas the plugin would read, and who owns each one. Start with one skill, such as production reporting, that uses little design data.
  2. Tighten Microsoft 365 permissions first. The assistant sees what the user sees. Remove broad access to customer folders and old project shares before anyone connects Claude to them.
  3. Check customer contracts and NDAs. Find out which customers allow their drawings and models to be processed by an AI service, and keep those that do not out of the folders Claude can read.
  4. Set the plan controls. On Team or Enterprise, decide who may install plugins and connectors, and switch off the Rate chats button if you do not want full conversations stored for feedback.
  5. Limit write access. If you use Infor's plugin, give approval rights only to the roles that already approve purchase orders and production changes, and make sure every action is logged in Infor.
  6. Export less from Vault. Share PDFs or simplified models instead of native files or full STEP exports when a quote or report does not need the geometry.
  7. Review every draft as if a new employee wrote it. Check figures against the linked sources before a quote, corrective action report or supplier request leaves the company.
  8. Keep dated proof. Register key designs with BORIS, so you can show which version you created and when, whatever tools touch the files later.

Is this the start of AI in the factory office?

It is one of several moves in the same direction. Autodesk announced a next-generation Autodesk Assistant and Inventor as the first Fusion Connected Client at AU 2026, which we covered in our AU 2026 summary. Autodesk's own State of Design & Make report found that many companies plan to spend more on AI but feel far from their goals. Infor's blog describes the division of labour this way: "Agents do the legwork. People make the calls."
What changes is where the risk sits. An assistant that can read the quote folder, the supplier inbox and the ERP at once is very useful, and it also concentrates access. The same care you give a Vault administrator account applies to the accounts and connectors an AI assistant uses. And plugins and extensions are software you install: our article on a trojanized Claude Code extension shows why only official sources should be used.
Good habits still decide the outcome. Our list of common mistakes engineers make with CAD security and our guide to CAD file protection with Vault, encryption and proof of ownership show how AI tools fit into a wider plan, and last week's ScreenConnect attacks on MSPs are a reminder that every tool with broad access can be misused.

The bigger picture

This week's news on our sister sites shows where control over engineering data is decided: at the moment data leaves its usual place.
  • Data that leaves with the equipment. On CADChain, the Samsung Display technology leak case describes how prosecutors say process log files were hidden on equipment that was being sold, so they would survive the wipe before sale.
  • When systems stop. BORIS for SOLIDWORKS reports on the Kinnarps cyberattack, which stopped production at three Swedish factories, and what CAD teams need to keep working when servers are shut down.
  • Terms decide who owns the output. Blended BORIS looks at World Labs opening its Atlas world model to everyone, and at terms under which free accounts get only personal, non-commercial rights to what they create.

Conclusion

Claude for Manufacturing, introduced on 12 November 2026, brings 17 skills and connectors to Autodesk Fusion, Infor, Microsoft 365 and Oracle NetSuite to Claude's Team and Enterprise plans. It drafts quotes, quality and production reports and supplier requests, leaves the decision to a person and, through Infor's own plugin, can also make approved changes in Infor. Inventor and Vault are not connected directly; their data reaches the plugin as files.
For an Inventor team, the useful question is which customer drawings, costs and supplier emails the assistant could read on day one. Tighten folder permissions, check customer contracts, set the plan controls, limit write access, share less geometry and review every draft. And keep dated proof of your designs, so you can show what is yours whichever tools handle the files.
Your designs, your proof.

BORIS for Autodesk Inventor gives every registered file a blockchain timestamp and a certificate of ownership, straight from Inventor.

👉 Protect your Inventor designs with BORIS

FAQ: Claude for Manufacturing and Inventor teams

What is Claude for Manufacturing?

It is a plugin for Anthropic's Claude assistant, introduced on 12 November 2026, with 17 skills and four connectors (Autodesk Fusion, Infor, Microsoft 365 and Oracle NetSuite). It drafts quotes, quality reports, supplier requests and production reports from a company's own records.

Who can use it?

Anthropic says it is available on Claude's Team and Enterprise plans. Infor's companion plugin, Infor Industry AI for Claude, is available to select Infor Velocity Suite customers with an eligible Claude plan.

Does it work with Autodesk Inventor or Vault?

Anthropic does not mention Inventor or Vault, and there is no Inventor or Vault connector in the announcement. Inventor data can reach the plugin as exported files, for example drawings or reports saved to Microsoft 365. Inventor 2027.2 has its own local MCP server for AI agents, but Anthropic has not said whether the manufacturing skills use it.

Can Claude change data in our ERP?

With Anthropic's Infor connector, Claude looks up records. Infor's own plugin can also create orders, release purchase orders and record transactions, within the user's permissions and after approval. Anthropic says the plugin does not operate equipment.

Does Anthropic train its models on our data?

Anthropic says that by default it does not train on inputs or outputs from its business products, including Claude for Work. If a user submits feedback with the thumbs buttons, the full conversation is stored for up to five years and may be used for training; plan owners can turn that button off.

Can we send customer drawings to it?

Only if your contract with that customer allows it. Many NDAs limit who may process drawings and for what purpose. Check first, and keep files from customers who do not allow it out of the folders the assistant can read.

How much does it cost?

Anthropic has not published a separate price for the plugin. It is offered to Team and Enterprise customers.

How does BORIS help?

BORIS for Autodesk Inventor registers CAD files with a blockchain timestamp from inside Inventor, so you can show which version of a design existed and when. It does not control what an AI assistant can read, and it does not replace access control, contracts or backups.